Mounting the G3TXQ Hexbeam to A Vertical Pole

This is an ideal quick way to mount the MW0JZE G3TXQ Hexbeam while out portable. Fix the clamps to the Hexbeam first and then to the pole/mast. The stubmast is very strong to do not be afraid to tighten the clamps. The clamps are available in the UK from this site www.dastechnology.co.uk

The MW0JZE - G3TXQ Hexbeam stubmast is 35mm OD, I would recommend that the the mast pole is approx 50mm, this will stop the Hexbeam tilting over on the mast. 

IMPORTANT, GRUB-SCREWS MUST BE AS TIGHT AS POSSIBLE!!!